DATA SHEET CAMERA SPECIFICATION
CAMERA ORDER CODES
MECHANICAL DATA
Mi-TIC EDGE
Mi-TIC STORM
Code
Resolution
Buttons
Frame rate
Camera dims
203mm x 96mm x
216mm x 110mm x
71mm
82mm
MI-320-1-EDGE
320x240
1
30Hz
(H x W x D)
MI-329-1-EDGE
320x240
1
9Hz
Camera weight
600g (21 oz)
665g (23.5 oz)
without battery
without battery
MI-320-3-EDGE
320x240
3
30Hz
765g (27 oz)
830g (29 oz)
MI-329-3-EDGE
320x240
3
9Hz
with std battery
with std battery
855g (30 oz) with
920g (32.5 oz) with
MI-320-3-STORM
320x240
3
30Hz
high capacity battery
high capacity battery
MI-329-3-STORM
320x240
3
9Hz
Battery dims
87mm x 76mm x 28mm (std battery)
(H x W x D)
87mm x 76mm x 35mm (high capacity battery)
WARRANTY
Battery weight
165g (6oz) (std battery)
24-month warranty as standard. (Rechargeable battery pack excluded ­
255g (9oz) (high capacity battery)
Warranty for 12 months.)
Charger dims
167mm x 112mm x 120mm
(H x W x D)
Warranty can be extended for up to an additional three years at the time of
purchase (exclusions apply).
Charger weight
550g (1lb and 3oz)
Main camera body
Radel®R-5100 and Santoprene®
ENVIRONMENTAL DATA
LCD window
Ultrason® E 2010 HC
LCD bumper
Santoprene®
Thermal conditions
Each camera has been designed to operate:
· continuously between -20°C (-4°F)
GE Window collar
Radel®R-5100 and Santoprene®
and +85°C (185°F) or
Lens window
Germanium (2mm thick) with durable coating
· 150°C (300°F) for 15 minutes
· 260°C (500°F) for 7 minutes
ELECTRICAL DATA
Sealing
IP67, will withstand immersion in water
Power consumption
<3 W typical
Impact
Each camera will withstand a drop from a height
Start-up time
5 seconds typical
of 2m (78 inches) onto concrete
Battery type
Lithium Iron Phosphate Rechargeable Battery
Storage
It is recommended that for maximum effective
Battery capacity
1100 mAh, 6.6V (std battery); 2500 mAh,
operational life, the storage temperature is kept
6.6V (high capacity battery)
between -20°C (-4°F) and +40°C (104°F)
Std Battery life
In excess of 2hrs @ ambient temperature (22°C,
72°F)
OPTICAL DATA
Std Battery charge
Less than 2 hours
Detector
Mi-TIC EDGE
Mi-TIC STORM
time
Dynamic range
-40°C to 760°C
-40°C to 1100°C
High Capacity
In excess of 5hrs @ ambient temperature (22°C,
(-40°F to 1400°F)
(-40°F to 2000°F)
Battery Life
72°F)
Direct Temperature
-40°C to 760°C
-40°C to 1100°C
High Cap, Battery
Less than 4.5 hours
Measurement
(-40°F to 1400°F)
(-40°F to 2000°F)
charge time
Sensor type
Un-cooled Microbolometer
Battery recharge
Over 1000 cycles
cycles
Sensor material
Amorphous Silicon (ASi)
Battery charging
5°C to 40°C (41°F to 104°F)
Resolution
384 x 288px
temp.
Pixel size
25m
Charger input
11V ­ 30V DC (12V and 24V vehicle systems)
Spectral response
7.5 ­ 14m
voltage
MDTD (Full camera
70 mK (0.07°C) typical
Charger operating
0°C to 40°C (32°F to 104°F)
system sensitivity)
(Minimum Discernible Temperature Difference)
temp.
NETD (Sensor
<50mK (<0.05°C)
sensitivity)
COMPLIANCE DATA
Refresh rate
60 Hz
Lens
Safety
IEC 60950-1 and related national standards (Tamb
Lens material
Germanium Composite
+80°C max)
Focal length
1m to infinity, optimised at 4m (3 ft to infinity,
Emissions
BS EN 61000-6-3:2007 + A1:2011,
optimised at 13 ft)
RFI/EMC
BS EN 50498:2010, ICES-003(2012),
FCC CFR-47 Subpart B, AUS/NZ 4251.1
Aperture
f/1.0
Immunity
BS EN 61000-6-2:2005, BS EN 50498:2010
Field of view
50° horizontal, 37.5° vertical
Vibration/Shock
BS EN 60721-3-2 Class 2M3
Display
Mi-TIC EDGE
Mi-TIC STORM
RoHS
All parts of the system are compliant
Size
69mm (2.7 inches)
90mm (3.5 inches)
with EU directive 2011/65/EC
Type
High grade, industrial, colour TFT active matrix LCD
Pixel format
QVGA 320 x 240, (each pixel RGB format,
total pixels 230,400 pixels)
argus® partner for Germany and Austria
Video input
Sensor synchronised direct digital drive
www.rosenbauer.com
Whilst e2v technologies has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the consequences of any use thereof and also reserves the
right to change the specification of goods without notice. e2v technologies accepts no liability beyond that set out in its standard conditions of sale in respect of infringement of third party
patents arising from the use of tubes or other devices in accordance with information contained herein.
e2v technologies (uk) limited, Waterhouse Lane, Chelmsford, Essex, CM1 2QU, United Kingdom. Holding Company: e2v technologies plc. Telephone: +44 (0)1245 493493.
Facsimile: +44 (0)1245 492492. Contact e2v by e-mail: enquiries@e2v.com or visit www.e2v.com for global sales and operations centres. © e2v technologies (uk) limited 2015.

---